![]() Place the connector and the cable into the RG11 crimper and crimp down firmly, balancing the crimper a few times to ensure you have got a good, solid crimp. If the center conductor is too long, trim it off and try again until it fits properly. Be sure that the center conductor from the cable is properly inserted into the pin already in the connector. Make sure that no metal shielding makes contact with the center pin. Peel the braided metal shielding back so it looks like shown. You will be left with something like shown in video. Providing a permanent watertight seal, our underground wire splice kits are perfect for direct burials. Pull the stripping tool off and remove any remaining pieces that are still connected. sku:MC3400 MELNI DIRECT BURIAL & SUBMERSIBLE BUTT SPLICE CONNECTOR FOR 3/0 - 4/0 AWG CABLE. Underground Guide 2. Products are supplied prestretched on a removable core for efficiency and ease. You will feel the stripper cut through the shielding as you spin it around the cable. 3M Splice Kits 84 Series Cold shrink splicing products are designed using 3M’s unique cold shrink delivery system. Spin the tool around the cable several times. First, take the RG11 stripping tool and line it up with the edge of your cable. ![]() A cutting tool is also handy to have around for the job. You will need a RG11 stripping tool and an RG-11 crimper to get the job done right. Improperly terminated cable results in poor connection, which means less signal getting to the signal booster, and ultimately, less coverage area in the building. Shop our Underground Splice Kit collection. ![]() Doing this correctly will ensure a good connection to all the various components of your signal amplifier. ![]() Transcript: Today, we show you how to properly terminate or put the ends on RG11 cable. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |